AMSOIL Saber Professional Synthetic, 100:1 Pre-Mix 2-Cycle Oil
AMSOIL Saber™ Professional (ATP) is formulated
with exclusive AMSOIL synthetic base oils and premium additives.
Designed for lean mix ratios in two-cycle motors, Saber 2-Cycle
Oil has excellent lubricity and cleanliness properties to control
friction and prevent wear, plug fouling, ring sticking and exhaust
port blocking. AMSOIL Synthetic 100:1 2-Cycle Oils have been protecting
and providing improved performance in two-cycle motors since 1973.
ISO-L-EGD, JASO FD, API TC
PRODUCT DESCRIPTION
Saber Professional (ATP) is specifically designed
for small engines including, but not limited to, chain saws, lawn
equipment, blowers, chop saws, pumps, scooters and go-carts. It
is available in a 3.5-oz. bilingual (English/Spanish) container
which is ideal for treating the 2 – 2.5-gallon cans of gas
commonly used for storing mixed gas on the job. Saber Professional
is also very good for use in motorcycles, snowmobiles, ATVs, jet
boats and personal watercraft. Saber Professional is formulated
with high temperature detergent additives to prevent hard carbon
deposits from forming in these hot operating motors. Saber Professional
is “smokeless” and delivers fewer emissions at 100:1
mix ratios than oils mixed at 50:1. Equipment operators subjected
to smoke and fumes will benefit from these low emission properties.
Because one mix ratio satisfies multiple pieces of equipment,
Saber Professional eliminates mix ratio confusion. Saber Professional
is recommended for pre-mix where ISO-L-EGD, JASO FD or API TC
is specified.
Applications
AMSOIL Saber 100:1 2-Cycle Oil is recommended
for 100:1 mix ratios in normal service. Richer mix ratios may
be used where desired.
2.6 oz.
per 1 U.S. gallon
50:1
8 oz.
per 5 U.S. gallons
80:1
1.3 oz.
per 1 U.S. gallon
100:1
8 oz.
per 6 U.S. gallons
100:1
TYPICAL TECHNICAL PROPERTIES
Saber Professional Synthetic 100:1
Pre-Mix 2-Cycle Oils
Kinematic Viscosity @ 100°C, cSt (ASTM D-445)
13.5
Kinematic Viscosity @ 40°C, cSt (ASTM D-445)
99
Viscosity Index (ASTM D-2270)
136
Pour Point °C (°F) (ASTM D 97)
-36 (-33)
Flash Point °C (°F) (ASTM D 92)
114 (237)
Fire Point °C (°F) (ASTM D 92)
114 (237)
DANGER:
harmful or fatal if swallowed. Contains synthetic lubricant
and petroleum distillates. If swallowed do not induce vomiting.
Contact a physician immediately. Keep away from fire, heat
and open flame. Use with adequate ventilation. Avoid frequent
or prolonged skin contact. Flush eyes with water for 15
minutes in case of contact. KEEP
OUT OF REACH OF CHILDREN.
