AMSOIL European Car Formula Synthetic 5W-40 Motor Oil
AMSOIL European Car Formula Synthetic 5W-40
Motor Oil is specially formulated for the lubrication needs of
modern European gasoline and diesel cars and light trucks. Formulated
with advanced AMSOIL synthetic base stocks, premium additives
and a 5W-40 viscosity rating, AMSOIL AFL is the preferred oil
for virtually all European automobiles, especially turbo charged
models. It is the only oil in North America to be recommended
for the latest specifications of all three major European automakers
- Volkswagen (Audi), BMW and Mercedes-Benz and the latest North
American API specifications.
PRODUCT DESCRIPTION
AMSOIL European Car Formula Synthetic 5W-40
Motor Oil (AFL) is specially formulated for the lubrication needs
of modern European gasoline and diesel cars and light trucks.
Formulated with advanced AMSOIL synthetic base stocks, premium
additives and a 5W-40 viscosity rating, AMSOIL AFL is the preferred
oil for virtually all European automobiles, especially turbo charged
models. It is the only oil in North America to be recommended
for the latest specifications of all three major European automakers
- Volkswagen (Audi), BMW and Mercedes-Benz and the latest North
American API specifications. AMSOIL AFL is highly versatile for
multiple applications.
AMSOIL, the leader in automotive synthetic lubrication,
produced the world's first API qualified synthetic motor oil in
1972. Trust the extensive experience of AMSOIL "The First
in Synthetics®" to do the best job protecting your engine.
Maximum Engine Protection
AMSOIL Synthetic European Car Formula contains
high quality anti-wear additives and surpasses the tough ACEA
oil specifications for high temperature/high shear viscosity.
It provides outstanding protection in high RPM, hot running engines
and delivers dependable long-term performance for the extended
drain intervals set by European automakers.
Superior Engine Cleanliness
The excellent oxidation stability, heat resistance
and detergency properties of AMSOIL Synthetic European Car Formula
keep engines clean. It is specially designed to prevent sludge
and varnish deposits for reduced oil consumption, extended engine
life and maximum overall performance.
Minimizes Exhaust Emissions
AMSOIL European Car Formula is designed for
newer vehicle emission control systems. It meets current industry
and vehicle manufacturer requirements for long life protection
of gasoline vehicle catalytic converters and diesel particulate
filters (DPF).
All Season Performance
The broad 5W-40 viscosity rating, low volatility
(burn-off) and wax free nature of AMSOIL Synthetic European Car
Formula make it excellent for hot and cold temperatures. Engine
wear is reduced, oil thickening is controlled and vehicles start
easier in cold temperatures.
APPLICATION
AMSOIL Synthetic European Car Formula is formulated
to surpass the most demanding European specifications. It is recommended
for European and North American gasoline or diesel vehicles requiring
any of the following worldwide specifications:
API SM/CF
ACEA C3-04
ACEA A3/B3-04
ACEA A3/B4-04
BMW LL-04
Mercedes Benz 229.31, 229.51
Porsche
Saab
Volvo
VW 502.00, 505.00, 505.01
MS-10725
Service Life
Recommended for the extended drain intervals
established by the vehicle manufacturer or extend based on oil
analysis. Change oil filter at time of oil change.
Mixing AMSOIL
AMSOIL AFL is compatible with conventional and
synthetic motor oils. Mixing AMSOIL motor oils with other oils,
however, will shorten the life expectancy and reduce the performance
benefits. AMSOIL does not support extended drain intervals where
oils have been mixed. Aftermarket oil additives are not recommended
for use with AMSOIL motor oils.
Health & Safety
This product is not expected to cause health
concerns when used for the intended application and according
to the recommendations in the Material Safety Data Sheet (MSDS).
TYPICAL TECHNICAL PROPERTIES
European Car Formula
Synthetic 5W-40 Motor Oil (updated as of 12/05)
Kinematic Viscosity @ 100°C, cSt (ASTM D-445)
13.7
Kinematic Viscosity @ 40°C, cSt (ASTM D-445)
80.8
Viscosity Index (ASTM D-2270)
174
Viscosity CCS, cP @ °C (ASTM D-5293)
5204 (-30)
Flash Point °C (°F) (ASTM D-92)
230 (446)
Fire Point °C (°F) (ASTM D-92)
246 (474)
Pour Point °C (°F) (ASTM D-97)
-42 (-44)
Noack Volatility, % weight loss (g/100g) (ASTM
D-5800)
8.9
Four Ball Wear Test (ASTM D-4172B @ 40 kg,
75°C, 1200 rpm, 1 hr), Scar, mm