Harley-Davidson Shifts Gears
on Synthetic Motorcycle Oil.
The recent introduction of Screamin' Eagle® Synthetic
Lubricant by Harley-Davidson® indicates the Motor Company
has finally recognized the benefits of running synthetic motorcycle
oil in their air-cooled engines. After years of advising dealers
and customers to avoid using synthetic oils in their bikes,
it's natural to wonder why the company is suddenly marketing
one.
For the past 20 years, Harley-Davidson® has
claimed its petroleum-based Genuine H-D Oil is best for the
"unique requirements of Harley-Davidson® air-cooled
V-twin engines." However, laboratory testing has consistently
revealed that Genuine H-D Oil does not provide the best protection
possible for Harley-Davidson® engines. In fact, Four-Ball
Wear Tests show Harley-Davidson® 20W--50 Motorcycle Oil
leaves a wear scar over 50 percent larger than that left by
AMSOIL Synthetic 20W-50 Motorcycle Oil.
One of the major benefits of running a synthetic
motorcycle oil is its resistance to oxidation and thermal degradation,
which inhibit the formation of sludge and deposits that contribute
to increased wear. In the past, Harley-Davidson® has defended
use of its Genuine H-D Oil by arguing that oil breakdown in
extreme heat is a non-issue because extreme heat conditions
are not normally faced by motorcycle engines, while the superior
cold-temperature benefits of synthetics also don't apply to
Harleys.
The fact is, engine oil in Harley-Davidson®
motorcycles is subject to very high temperatures. Being air-cooled,
Harley-Davidson® engines get especially hot while idling
in traffic, commonly reaching temperatures up to 240 degrees
Fahrenheit. As heat and oxidation increase, so does viscosity,
adversely affecting the lubricating qualities of the oil and
increasing wear.
The water, soot and acid byproducts of combustion
also contribute to deposit formation. Harley-Davidson® has
stressed the importance of regular oil changes in order to remove
these contaminants. Of course, promoting regular oil changes
is also a good way to promote using petroleum-based Genuine
H-D Oil. High-quality synthetic oils formulated with high-performance
additives effectively withstand such contaminants, allowing
motorcyclists to safely extend drain intervals.
In support of their about-face and the introduction of
a synthetic oil, Harley maintains that "the Motor Company
has never supported the use of synthetic products in our vehicles
because there has never been any test validations completed
on the numerous formulations in HD/Buell motorcycles. This product
has been exclusively designed for Harley-Davidson® and is
the only synthetic product TESTED and CERTIFIED by Harley-Davidson®
engineering for use in HD/Buell motorcycles."
Although this is necessary marketing hype, Harley-Davidson
® V--twin air-cooled engines are not unique in their lubrication
requirements and do not require a special Harley-only fluid.
There is nothing about Screamin' Eagle ® Synthetic Motorcycle
Oil that sets it apart from, or makes it better than, many other
synthetic motorcycle oil formulations, except that Harley-Davidson®
is marketing it and directly profiting from the sales.
According to Harley-Davidson®, one of the
unique benefits offered by Screamin' Eagle® Synthetic Motorcycle
Oil is its versatility. For the first time the company is recommending
an oil that can be used in the engines, primary chaincases and
transmissions of most Harley-Davidson® motorcycles, including
Evolution XL, Evolution 1340, Twin Cam 88 and 88B, Revolution
and Buell models. This feature, however, is not unique. AMSOIL
20W-50 Synthetic Motorcycle Oil may also be used in the engines,
primary chaincases and transmissions of these applications,
providing superior lubricating protection in each component.
The
Four-Ball Wear Test is the industrys standard
test method for measuring the wear preventive characteristics
of a lubricant. Placed in a bath of the test lubricant,
three fixed steel balls are put into contact with
a fourth ball in rotating contact at preset test conditions.
Lubricant wear protection properties are measured
by comparing the average wear scars on the three fixed
balls. The smaller the average wear scar, the better
the protection.
How does Screamin' Eagle® Synthetic Motorcycle
Oil measure up to AMSOIL in wear protection? Four-Ball Wear
Test results indicate that AMSOIL Synthetic Motorcycle Oil still
provides the best protection possible for motorcycles. In fact,
Screamin' Eagle® Synthetic Motorcycle Oil leaves a wear
scar nearly 80 percent larger than AMSOIL 20W-50 Synthetic Motorcycle
Oil.
Not only does AMSOIL Synthetic Motorcycle Oil offer greater
wear protection than Screamin' Eagle® Synthetic Motorcycle
Oil, it also delivers greater value. Suggested retail price
of Screamin' Eagle® is nearly $2 a quart higher than AMSOIL
20W-50 Motorcycle Oil. And because AMSOIL Synthetic Motorcycle
Oil may be used for extended drain intervals of up to twice
the manufacturer's suggested interval, while Screamin' Eagle®
is recommended for standard drain intervals, AMSOIL customers
realize additional savings.
Harley-Davidson® claims Screamin' Eagle®
Synthetic Motorcycle Oil has been "exclusively designed"
for use in their motorcycles, pointing to extensive bench testing
and over 230,000 miles of durability testing to back it up.
AMSOIL INC. has 30 years of experience providing superior lubricating
protection for all brands of motorcycles, and AMSOIL Synthetic
Motorcycle Oils have been tested in millions of over-the-road
miles. Testimonials from countless motorcyclists further demonstrate
the superiority of AMSOIL Synthetic
Motorcycle Oils.
Formulated with top-of-the-line synthetic base
stocks and high-temperature deposit control additives, AMSOIL
Synthetic Motorcycle Oils provide superior protection and performance
for motorcycles in all operating conditions. AMSOIL Motorcycle
Oils effectively withstand oxidation and thermal degradation,
keep wear to an absolute minimum, hold contaminants in suspension
and keep engines running cool and clean.
AMSOIL Synthetic Motorcycle Oils
Reduce operating temperatures
Keep engines clean and deposit-free
Provide maximum protection against wear
Formulated without friction modifiers for
smooth performance
Saves money with extended drain intervals
of up to two times the manufacturers' recommendations