The AMSOIL Dual Remote Oil Filtration System
converts an engine’s full-flow oil filter system into a full-flow/by-pass
oil filtration system by attaching an AMSOIL Full-Flow Oil Filter
and AMSOIL Spin-On By-Pass Oil Filter onto a remote mount. The
Dual Remote System provides superior filtration efficiency, increased
oil capacity and improved oil filtration accessibility.
PRODUCT DESCRIPTION
The AMSOIL By-Pass Oil Filter provides the best
possible filtration protection against wear, oil degradation,
rust and corrosion. Working in conjunction with the engine’s full-flow
oil filter, the AMSOIL By-Pass Filter operates by filtering oil
on a "partial-flow" basis. It draws approximately ten percent
of the oil at any one time and traps the extremely small, wear-causing
contaminants and water that full-flow filters can’t remove. The
AMSOIL By-Pass Filter typically filters all the oil in the system
several times an hour, so the engine continuously receives analytically
clean oil.
Reduces Wear
Approximately
60 percent of all engine wear is caused by dirt particles in the
5 to 20 micron range. These particles can get inside the precision
clearances between engine components and cause severe damage.
While full-flow oil filters generally stop contaminants no smaller
than 25 to 40 microns, the AMSOIL By-Pass Filter effectively stops
particles smaller than one micron in size, substantially reducing
engine wear.
Prevents Oil Degradation, Rust and Corrosion
Water enters motor oil as a combustion by-product
or as a condensate. Water contamination of the motor oil can cause
extreme engine damage. Water causes metal surface rust and corrosion,
which increases friction and wear and deteriorates the close-fitting
tolerances between engine components. In addition, water reacts
with other oil contaminants to form corrosive acids, which also
damage metal components. The AMSOIL By-Pass Filter removes water,
reducing the risk of oil degradation, engine rust and corrosion.
Extends Oil Drain Intervals
Because the AMSOIL By-Pass Oil Filter removes
water and particles smaller than one micron, it significantly
increases the time oil can safely be left in the engine. In fact
, engines using AMSOIL Synthetic Motor Oil and an AMSOIL By-Pass
Oil Filter routinely show much lower rates of engine wear - even
when the oil is used for significantly longer drain intervals
- than engines using conventional products and conventional oil
drain intervals. That saves motorists time and money and helps
protect the environment by creating substantially less used oil.
AMSOIL By-Pass Filter Replacement
Chart
Type of Unit
Stock Number
Size (Approx.)
Additional
Oil Needed
Crankcase Capacity
Applications
SINGLE SPIN-ON ELEMENT
(Used with BMK-11 or any DUAL REMOTE SYSTEM)
EaBP-90
Diam. = 4.5 in.
Height = 6 in.
With Mnt. = 8 in.
1 qt.
up to 9 qt.
Pleasure Vehicles,
Light Trucks and Smaller Commercial Applications
EaBP-100
Diam. = 4.5 in.
Height = 8 in.
With Mnt. = 10 in.
1.5 qt.
up to 15 qt.
EaBP-110
Diam. = 4.5 in.
Height = 10 in.
With Mnt. = 12 in.
2 qt.
up to 21 qt.
DUAL SPIN-ON ELEMENT
(Used with BMK-12 DUAL-GUARD)
(2) EaBP-90's
Diam. = 5 in.
Height = 9.5 in.
With Mnt. = 8 in.
2 qt.
15 to 18 qt.
Large Trucks, Construction,
Farm and Industrial Equipment
(minimum sump capacity = 15 qt.)
(2) EaBP-100's
Diam. = 5 in.
Height = 9.5 in.
With Mnt. = 10 in.
3 qt.
15 to 30 qt.
(2) EaBP-110's
Diam. = 5 in.
Height = 9.5 in.
With Mnt. = 12 in.
4 qt.
15 to 42 qt.
Normal Service Life:
When used in conjunction with AMSOIL motor oil and an EaO
or Donaldson Endurance filter, the EaBP should be changed
every other full flow filter change up to 60,000 miles.
When used with other brands of motor oil or full flow filters,
the EaBP filter should be changed every other full flow
filter change. AMSOIL recommends using oil analysis when
extending oil drain intervals.
APPLICATIONS
Mount
Filter (Order separately unless noted)
BMK-11
Any size AMSOIL Spin-On By-Pass Filter Element
BMK-13
Any size AMSOIL Spin-On By-Pass Filter Element
BMK-15Ea (complete with filters)
EaO-26 and EaBP-100 (complete with filters)
The BMK-15Ea Dual Remote Filtration System is not recommended
for 2004 and newer Dodge pickups equipped with Cummins 5.9L
diesel engines. AMSOIL is recommending the BMK-11 for these
applications. AMSOIL still recommends the BMK-15Ea for 2003
and older Dodge pickups equipped with this engine.
BMK-16Ea (complete with filters)
International Diesels
EaO-26 and EaBP-100 (complete with filters)
BMK-17Ea
(complete with filters)
Duramax Diesels (in GM Pick-ups)
EaO-26 and EaBP-100 (complete with filters)
Vehicles with sump capacities greater
15 qts.
Mount
Filter
BMK-12 Dual Guard
Any size AMSOIL Spin-On By-Pass (mount requires 2 filters)
