AMSOIL Foam Filter Oil has long provided users
of AMSOIL air filters with a high level of air flow and superior
particle removal. Now, five years of research, testing and development
have yielded a new and improved Foam Filter Oil formulation. New
AMSOIL High Tack Foam Filter Oil is a special blend of synthetic
polymers that allows maximum air flow and increased particle removing
efficiency and capacity. High Tack Foam Filter Oil stays in place
throughout service life, resists washout from carburetor fogging
and will not plug foam filter cells, while its new red color helps
ensure even oil coverage across the entire filter.
AMSOIL High Tack Foam Filter Oil was tested with
AMSOIL 2-Stage Foam Filter media under the SAE J726 test methodology,
yielding an efficiency rating of 99.5 percent. High particle removing
efficiency is critical in preventing engine wear, keeping equipment
running at peak efficiency and improving fuel efficiency.
AMSOIL High Tack Foam Filter Oil is available
in its traditional form and a new and convenient aerosol spray.
Because it offers users quick and convenient application, the
new spray formulation is a boon for power sports enthusiasts.
Applying High Tack Foam Filter Oil
For best performance, apply a generous amount
of High Tack Foam Filter Oil and work it into the foam media.
Squeeze out excess oil, leaving a uniformly oiled filter.
A properly oiled filter will feel oily or tacky
to the touch on both the outer and inner surfaces, but should
not be dripping oil.
When reinstalling the air filter, apply a thin
film of AMSOIL Multi-Purpose Grease on the foam base to insure
a leak free seal between the filter and housing.
