Transmission Fluids
Filtration Products
Air Intake Systems
Greases
2-Cycle Oils
Power Steering Fluid
Fuel Additives
Brake Fluids
Industrial Lubes
Family Fleet
4x4s
Racing
Trucking
R/Vs
Motorcycles
MotoX
Marine
Farm & Ranch
Fleet
Industrial
Heavy Equipment
Oil Selection & Filter Lookup Guide
 
 

AMSOIL Supershift Synthetic Racing Transmission Fluid

 

Formulated for High Horsepower and High Torque Applications

Allison C-4

Ford Type F

PRODUCT DESCRIPTION

AMSOIL Synthetic Super Shift® Racing Transmission Fluid is specifically formulated for automatic transmissions operating in high horsepower and high torque conditions. AMSOIL Super Shift® contains top quality additives selected specifically for racing applications. Its unmatched transmission friction performance provides high holding capacity for maximum torque transfer and brake power, reduced wear and longer clutch plate life. Super Shift® virtually eliminates slippage, promotes positive clutch engagement and improves overall shift performance, helping racers improve on elapsed times.

Wear Protection

AMSOIL Synthetic Super Shift® Racing Transmission Fluid contains a robust additive system for extra protection, and its shear stable base oils prevent viscosity loss throughout its service life. Super Shift® provides long-term protection against equipment wear, even when the equipment is frequently subjected to sustained periods of applied pressure or high horsepower and high torque. Clutches, bearings and bushings last longer, saving money on transmission repairs.

Extreme Temperature Performance

AMSOIL Synthetic Super Shift® Racing Transmission Fluid is highly effective against heat and wear, reducing transmission temperature and minimizing or eliminating burned up transmissions. Its superior oxidative and thermal stability inhibits the formation of varnish, deposits and sludge so equipment runs clean. Super Shift® acts as a heat transfer fluid and by controlling clutch slippage it helps reduce operating temperatures of hot transmissions by up to 50° F. In low temperatures, Super Shift® flows readily for dependable startup and poststartup protection.

Copper Corrosion, Rust and Foam Inhibition

AMSOIL Synthetic Super Shift® Racing Transmission Fluid protects equipment from copper corrosion and rust, even during equipment storage. It controls foaming for reduced component wear and responsive clutch plate engagements.

RECOMMENDATIONS

AMSOIL Synthetic Super Shift® Racing Transmission Fluid is recommended for automatic transmissions coupled to high horsepower, high torque engines. It is also recommended where heavy loads place a high demand on transmissions. Recommended where Allison C-4 or Ford Type F is required. Suggested automatic transmission applications::

  • Drag Racing Cars and Trucks
  • Monster Trucks
  • Stock Cars
  • Off Road 4x4 Vehicles
  • Street Hot Rods

COMPATIBILITY

AMSOIL Synthetic Super Shift® Racing Transmission Fluid is fully compatible with other fluids. However, a mixture of AMSOIL Super Shift® and another oil will decrease performance and offer a shorter service life than pure AMSOIL Synthetic Super Shift® Racing Transmission Fluid.

Note: AMSOIL Synthetic Super Shift® Racing Transmission Fluid is not recommended as a replacement for Ford Mercon, GM Dexron or Chrysler ATF+ type fluids in passenger vehicle and truck transmissions as it may cause erratic shift patterns, chattering or noise. AMSOIL is not responsible for transmission performance inconsistent with those specifications listed and where transmissions have been modified from the original manufacturer’s design.

HEALTH & SAFETY

This product is not expected to cause health concerns when used for the intended application and according to the recommendations in the Material Safety Data Sheet (MSDS).

Typical Technical Properties

AMSOIL Synthetic Supershift Racing Transmission Fluid (ART)

Kinematic Viscosity @ 100° C, cSt (ASTM D-445)

7.1

Kinematic Viscosity @ 40° C, cSt (ASTM D-445)

40.5

Viscosity Index (ASTM D-2270)

138

Flash Point °C (°F) (ASTM D-92)

254 (486)

Fire Point °C (°F) (ASTM D-92)

270 (518)

Pour Point °C (°F) (ASTM D-97)

-51 (-60)

Four Ball Wear Test 40 kg. 75°C, 1200 rpm, 1 hour (ASTM D-4172 B)

0.35
 
 
© 2011 by AMSOIL Direct Jobber - Ace Hi Oil

No portion of this site may be used or duplicated without the express permission of AMSOIL Direct Jobber - Ace Hi Oil
Designed and administered by JB Design